Get the Flash Player to see this rotator.
 
 
 

 

 

Creek Evolution 2 CD Player

 

Following the recent award for "outstanding popularity", Creek's Evolution 2 amplifier and CD Player have now been awarded Hi-Fi Review Magazine's Best Buy of the Year 2010" (15 sept 2010)

 

Creek Evolution 2 CD Player

    • Producator:
    • Creek
    • Categorie:
    • CD playere
  • call for price

  • Descriere Produs

    • Creek Evolution 2 CD Player uses a Philips VAM1201 laser assembly and low profile loader. Servo control and decoder functions are performed by a Philips chip set. Creek Evolution 2 CD Player uses a single high current C core mains transformer fed from the mains via a custom designed common mode filter. To stabilise and isolate the voltages to the various analogue and digital circuits the Creek Evolution 2 CD Player uses no less than eight voltage regulators. Digital and analogue supplies are kept separate and the master clock uses its own supply. The Creek Evolution 2 CD Player has been designed to use a low jitter oscillator module that clocks the data from the drive to the D to A converter and also clocks the microcontroller with the same frequency. The data from the decoder is re-clocked to provide a low jitter signal to a Burr-Brown PCM 1738, DAC IC, which is capable of 24 bit/192kHz operation. The Creek Evolution 2 CD Player is an entry level product and therefore its price cannot support the level of circuitry required to perform up-sampling correctly. Following the D to A conversion, the Creek Evolution 2 CD Player uses four high grade Burr-Brown OPA604 op-amps to sum the balanced output from the DAC and to convert the output current into a voltage. As it also exits the D to A converter in the reverse phase, the Creek Evolution 2 CD Player uses two dual OPA2134 op-amps to both buffer the signal and reverse the phase prior to the output sockets. A relay is used at the output to mute the signal to ground when required.
     
     

  • Specificatii

      • Power requirements
      • 220/240—50 Hz or 100/120—60Hz
      • Power consumption
      • 23W max; 6W standby
      • FQ response
      • 1 Hz - 20 kHz ± 0.25 dB
      • Output level
      • 2.0 V RMS at 1kHz, 0 dB
      • Output impedance
      • 50 Ohm, min load 1 Ohm
      • Laser type
      • Semicond. ALGaAs, 790 nm ± 25 nm
      • THD + Noise
      • > -97dB
      • Dynamic range
      • > 100dB
      • THD
      • < 0. 0008 % at 1 kHz, 0 dB
      • Weight
      • 6Kgs
      • Size W/H/D
      • 430 x 80 x 340mm
     
 
 

 
 
 
Copyright © 2011 AUDIOCONCEPT :: design by clannad